Vizio VECO320L 1A - Manual (Page 20)

VIZIO VECO320L1A User’s Manual
20
www.VIZIO.com
STEREO SYSTEM
Connecting an external
Receiver/Amp
Optical Output of Audio received with HD Programs
If your sound system has an SPDIF (optical) digital
audio input you can connect it to the optical AUDIO
OUT (white area on the back or your HDTV). This is
active when receiving audio with the program being
viewed no matter what input is being used.
1. Turn off the power to the LCD HDTV and
Receiver/Amp.
2. Using an audio cable (optical cable), connect the
cable to the audio input connector on the
Receiver/Amp and connect the other end to the
OPTICAL OUT (white area) audio connector at the
rear of the LCD HDTV.
3. Turn on the power to the LCD HDTV and
Receiver/Amp.
4. Then press the MENU button on the remote
control to open the On-Screen Display (OSD)
menu.
5. Press the on the remote control to select the
Audio menu.
6. Press the on the remote control to select
SPEAKERS.
7. Press the on the remote control to select OFF
so that the sound from the HDTV will now be
routed through your Receiver/Amp system.
Press the LAST key once to return to the previous
screen or repeatedly to return to your program if task
has been completed.
Note:
Refer to your Receiver/Amp user manual to select
the corresponding audio input.
The audio output can not be connected directly to
external speakers.