Vizio VECO320L 1A - Manual (Page 30)

VIZIO VECO320L1A User’s Manual
30
www.VIZIO.com
Adjusting the TV settings
If you did not set up your HDTV for DTV / TV channels using the Initial Setup screens or if your setup has
changed, you can do so from the TV menu.
Press $ / ! / " / # to select and adjust options, then press LAST when finished making adjustments.
Press LAST to return to the previous screen or repeatedly to exit the OSD.
The following options are available in the TV menu:
1. Tuner Mode - Select Cable or Antenna (Air) depending upon the equipment you have
connected to the DTV / TV Input.
2. Auto Search - Your HDTV can scan for channels in your area and store the channel information
in the channel list. If a channel does not have a signal, your HDTV skips that channel. When you
press CH "or CH#, your HDTV changes to the next channel in the channel list.
3. Skip Channel - After your HDTV has stored all of the available DTV channels in memory, you
can delete channels from the channel list that you do not want to see. You can still tune to
deleted channels using the channel buttons on the remote control.
4. MTS - Multi-channel television sound (MTS) allows you to select Stereo, SAP, or Mono.
5. Time Zone - Setting the correct Time Zone for your area ensures that the correct program times
are shown in the Electronic Program Guide.
6. Daylight Saving - Setting the daylight saving time for your area will ensure that the correct
program times are shown in the Electronic Program Guide.