Volvo 960 - Manual (Page 181)

1996 Volvo 960
Attaching the jack
There is a jack attachment adjacent to each wheel location. Position the jack on the bar in the jack
attachment as shown in the illustration above and crank while simultaneously guiding the base to the
ground. The base of the jack must be flat on a level, firm, non-slippery surface. Before raising the car
check that the jack is still correctly positioned in the attachment . Now raise the vehicle until the wheel
is free of the ground. Unscrew the wheel nuts completely and carefully remove the wheel so as not to
damage the tread of the studs.
file:///K|/ownersdocs/1996/1996_960/96960_601.htm (3 of 5)12/30/2006 10:13:03 AM