Volvo 960 - Manual (Page 9)

1996 Volvo 960
pg. 1:6 Lighting, Turn signals
Headlights and parking lights
All lights off *
Parking lights on **
Headlights and parking lights are on if starting (ignition) switch is in position I or II.
If the headlight switch is in position all lights will go out when starting switch is switched off.
With the headlight switch in position the parking lights will stay on (headlights off) with the daytime
running light switch (A) in position .
The high beams can only be switched on if the headlight switch is in position .
Switch from high to low beams, and vice versa, by moving the turn signal switch lever on the left side of
the steering column towards the steering wheel.
* Models equipped with daytime running lights: The low beams, tail lights, parking lights and license
plate lights will come on automatically when the ignition is switched on.
Automatic daytime running lights
NOTE: The daytime running light function may only be disabled (turned off) in the U.S. - Canadian law
mandates the use of daytime running lights.
Screw A in the illustration (available on U.S. models only) is used to control the automatic daytime
running lights when the headlight switch is in position 0. To adjust, press in the screw with a small
screwdriver and turn to one of the following positions:
Automatic daytime running lights
Automatic daytime running lights
** The daytime running lights will also function when the headlight switch is in position and switch
A is in this position.
All lights off (daytime running light function disabled)
file:///K|/ownersdocs/1996/1996_960/96960_106.htm (1 of 8)12/30/2006 10:12:30 AM