Vanguard Heating VDVF36PP - Manual (Page 15)

15 105706
OWNER’S MANUAL
VENTING
INSTALLATION
Continued
HIGH ALTITUDE
INSTALLATION
Your Vanguard direct-vent fireplace has
been AGA tested and approved for eleva-
tions from 0-2000 feet and CGA certified
for elevations from 0-4500 feet.
When installing this fireplace at an elevation
above 2000 feet (in the USA), you may need
to decrease the input rating by changing the
existing burner orifice to a smaller size. Re-
duce input 4% for each 1000 feet above sea
level. Check with your local gas company for
proper orifice size identification.
When installing this fireplace at an eleva-
tion above 4500 feet (in Canada), check
with local authorities.
Consult your local gas company to help de-
termine the proper orifice for your location.
For assistance with any high altitude instal-
lation contact DESA International’s Tech-
nical Service Department at 1-800-DESA-
LOG (1-800-337-2564).
PARTS LISTS FOR VENTING
KITS AND COMPONENTS
Vanguard Rigid Venting
Number Description
*CVK Corner Vent Kit
Includes: 7" x 30º Elbow, 7" x 90º
Elbow, 7" Adjustable Galvanized
Pipe (7-12"), 6" Pipe, Wall
Thimble, Horizontal Termina-
tion, RTV Silicone and 20 Screws
*BVK Basement Rigid Vent Kit
Includes: 7" x 30
°
Elbow, 7" x 4'
Galvanized Pipe, 7" x 90
°
El-
bow, 7" Adjustable Galvanized
Pipe (7-12"), Wall Thimble,
Horizontal Termination, RTV
Silicone and 20 Screws
Number Description
*SVK Snorkel Rigid Vent Kit
Includes: 7" x 30
°
Elbow, 7" x 4'
Galvanized Pipe, 7" x 90
°
El-
bow, 7" Adjustable Galvanized
Pipe (7-12"), Wall Thimble, 36"
Snorkel Termination, RTV Sili-
cone and 28 Screws
*RVF Roof Rigid Vent Kit
Includes: Flue Restrictor, Storm
Collar, 7" x 30
°
Elbow, 7" x 4'
Galvanized Pipe, 7" x 2' Galva-
nized Pipe, 7" Adjustable Gal-
vanized Pipe (7-12"), Firestop
Support, Roof Flashing, RTV
Silicone, Vertical Termination,
and 26 screws
D1000 7" x 12" Galvanized Coaxial
Pipe (6 pcs.)
D1010 7" x 24" Galvanized Coaxial
Pipe (6 pcs.)
D1020 7" x 48" Galvanized Coaxial
Pipe (6 pcs.)
D1030 7" Adjustable (7-12")
Galvanized Coaxial Pipe
(6 pcs.)
D1050 7" x 6" Galvanized Coaxial
Pipe (6 pcs.)
D2000 7" x 90
°
Elbow (6 pcs.)
D2010 7" x 45
°
Elbow (6 pcs.)
D2060 7" x 45
°
Starter Elbow
D3000 Wall Strap/Offset Support
(6 pcs.)
D3010 Storm Collar (6 pcs.)
D3020 Wall Thimble (6 pcs.)
D3050 Vertical Restrictor (6 pcs.)
D3060 Ceiling Firestop/Support
(6 pcs.)
D3070 Rectangular Horizontal Rigid
Vent Termination Cap
D3090 Cathedral Ceiling Support
Box
D4000 Roof Flashing 6/12-9/12
D4010 Roof Flashing 9/12-12/12
D4020 Flex Connector (6 pcs.)
D4030 Flex Wall Thimble (6 pcs.)
D4040 4" Hose Clamp (6 pcs.)
D4050 7" Hose Clamp (6 pcs.)
D5000 Vinyl Siding Standoff (6 pcs.)
SIMPSON DURA-VENT
GS 4" x 6
5 /
8
"
Number Description
902
7" x 48" Pipe
903 7" x 36" Pipe
904 7" x 24" Pipe
906 7" x 12" Pipe
907 7" x 9" Pipe
908 7" x 6" Pipe
911 7" Adjustable (11"-14 5 /
8
") Pipe
940 Wall Thimble
941 Cathedral Ceiling Support Box
943 Roof Flashing 0/12-6/12
943S Roof Flashing 7/12-12/12
945 7" x 45
°
Elbow
950 Vinyl Siding Standoff
953 Storm Collar
963 Ceiling Firestop
981 36" Snorkel Termination
984 Horizontal Termination Vent Cap
988 Wall Strap
990 7" x 90
°
Elbow
991 Vertical High Wind Termination
Vanguard Flexible Venting
Number Description
FGFVK Flex Ground Floor Vent Kit
Includes: Flex Adapter, 7" x 4'
Flexible Pipe, 4" x 4' Flexible
Pipe, Wall Thimble, Horizontal
Termination, (4) Spacer Springs,
(2) 4" Hose Clamps, (2) 7" Hose
Clamps, RTV Silicone, and
10 Screws
D1040 7" x 25' Coaxial Flex Pipe
with Spacer Springs
D3080 Rectangular Horizontal
Flex Termination Cap
Vanguard Rigid Venting (Cont.)
*NOTICE: The 7" x 30
°
Elbow sup-
plied with kits CVK, BVK, SVK,
and RVF cannot be used. It MUST
be replaced with a 7" x 45º Starter
Elbow (D2060).