Worth Data 5202D - Manual (Page 54)

Read Mode Settings Continued:
Add-on
Delay Timer
disable add-on wait more default
,XA,
add-on wait mode = 0.25 seconds
,XB,
add-on wait mode = 0.50 seconds
,XC,
add-on wait mode = 0.75 seconds
,XD,
Since WPC-type codes (UPC, EAN) with add-on (supplements) have a high probability of
unsuccessful decoding, the scanner repeats decoding the add-on code during the specified period of
time. It is effective to read the add-on parts, but it will also cause a reduced response when a code
without an add-on is read.
Margin Check
(Quiet Zone)
no margin check
.YN,
margin check 1/7 normal
,YO,
margin check 2/7 normal
,YP,
margin check 3/7 normal
,YQ,
margin check 4/7 normal
,YR,
margin check 5/7 normal
,YS,
margin check 6/7 normal
,YT,
margin check normal default
,YU,
Power Saving
disable power saving (USB I/F default) default
,XSC,
power saving after 0 seconds (RS-232 I/F default) default
,E64,
power saving after 1 second
,XSH,
power saving after 2 seconds
,EB0,
power saving after 5 seconds
,EB1,
power saving after 10 seconds
,EB2,
power saving after 30 seconds
,XSD,
power saving after 10 minutes
,XSE,
power saving after 30 minutes
,XSF,
power saving after 60 minutes
,XSG,
A-48