SUUNTO D9 - Manual (Page 72)

70
When the SELECT button is pressed during the dive:
- A special mark, bookmark is written in the profi le me-
mory.
- The Dive Timer shown in the center window is stop-
ped, reset and started again
- The previously timed interval (leg) is displayed
Tank pressure (if enabled) and ascent rate indicator are also
displayed during the dive.
NOTE! The Gauge mode provides no decompression infor-
mation.
NOTE! There is no ascent rate monitoring in the Gauge mo-
de
NOTE! If you dive with the Gauge mode, it is not possible
to change between the modes before the no fl y time has
counted down.
6.4. USING THE COMPASS IN DIVE MODE
The compass function can be accessed also from the DIVE
mode (Fig. 6.23). To access the compass from either mode
hold down the S (Select) button for > 2s. The compass display
will be as described in chapter 4.2. with the additions that:
Fig. 6.24. Surface display.
It is 6minutes since you ha-
ve surfaced from a 32 mi-
nute dive, which maximum
depth was 18.0 m [60 ft].
The present depth is 0.0 m
[0 ft]. Airplane symbol and
No-Fly value indicates that
you should not fl y for 11hrs
54minutes. Diver Attention
Symbol indicates that you
should prolong your surface
interval time because of ex-
cess micro-bubbles.