At the surface – SUUNTO D9 User Manual

Page 73

Advertising
background image

71

-

the current depth is displayed

-

all diving related alterative display data is available

-

the ascent rate bar-graph is displayed

-

the tank pressure bar-graph is displayed (if wireless
transmission enabled)

In order to save battery power the compass display will auto-
matically return to the DIVE mode after 60s has elapsed since
the last button press.

6.5. AT THE SURFACE

6.5.1. SURFACE INTERVAL

An ascent to any depth shallower than 1.2 m [4 ft] will cause
the DIVING display to be replaced by the SURFACE display,
giving the following information (Fig. 6.24.):

-

present depth in meters [ft]

-

no-fl ying warning indicated by an airplane icon (Table
6.1)

-

Diver attention symbol indicates surface interval time
should be prolonged (Table 6.1)

-

STOP label for 5 min, if the Mandatory Safety Stop
was violated

Fig. 6.25. Surface Mode af-
ter a violated decompressi-
on dive. Er symbol indicates
that you have violated the
ceiling for more than three
minutes. You must not dive
again for at least 48 hours.

Advertising