Wegener Communications IPUMP 562 - Manual (Page 43)

www.wegener.com 800092-01 Rev. A 33
Unity 552 User’s Manual
2. Press the down arrow button to select Current Quality .
3. View the details as shown in Figure 3.24 .
Figure 3.24: iPump 562 OSD Current Quality
History This Setting screen
Use following steps to display the History This Setting screen on the OSD menu:
1. Navigate to the Signal Quality screen. See Signal Quality screen on page 32
OR from a Signal Quality sub-screen, press the left arrow button to go back to the
Signal Quality screen.
2. Press the down arrow button to select History This Setting .
3. Press Enter .
4. View the details as shown in Figure 3.25 .
Figure 3.25: iPump 562 OSD History This Setting