Wolfcraft 6157 User Manual
Page 20
20
Cutting Without Fences and/or Guard
Using the router without
the safety shield and
fences in place can lead to serious
personal injury. Use extreme caution:
Operate the router without safety
shields and fences ONLY when
absolutely necessary, and with ball-
bearing-guided-type router bits.
WARNING
Feed workpiece against
the router bit's direction of
rotation. Unplug router prior to
changing the bit, modifying settings, or
making any other adjustments.
Some jobs require that you rotate the
safety shield out of the way and remove
the fences. See Figure 23.
WARNING
If the piece of wood you are routing is
between you and the router bit, feed
from RIGHT to LEFT. Remember to
always feed the workpiece against
router bit's direction of rotation. See
Figure 24.
If the router bit is between you and the
piece of wood being routed, then feed
from LEFT to RIGHT. Always feed
against the rotation of the router bit. See
Figure 25.
Scrap pieces will provide extra stability
and support when routing a small
workpiece or ends of large workpieces.
See Figure 26.
2
1
Figure 23
1. Interior router cut
2. Window
Figure 24
Figure 25
1
2
1. Small workpiece
2. Scrap piece
Figure 26