Walker IMPLEMENT HITCH SB6670 - Manual (Page 34)

Assembly Instructions
30
Attach Snowblower to Implement Hitch
9. Attach the driveline quick lock coupler to the
tractor PTO.
Connect Driveline Coupler to Tractor PTO
10. Attach the parallel bar to the female hitch and
the implement adaptor using the two clevises
and spring clips.
Attach Parallel Bar to Female Hitch
11. Insert the rotation handle into the rotation worm.
Align the holes and lock in place with a 1/4 x
1 in. socket head cap screw and nylon locknut.
12. Install the plastic handle grip on the chute rota-
tion handle.
Insert Rotation Handle into Rotation Worm
13. To install the optional tire chains:
a. Remove the tractor wheels.
b. Attach the tire chains to the wheels.
c. Place the wheel spacer plates on the lug
bolts. The wheel spacer plates provide
clearance for the chains between the tires
and the tractor body.
d. Place the wheels back on the tractor.
e. Reinstall and tighten the lug bolts.
WARNING
This shaft turns at high RPM. If the collar
is not locked to the shaft at the tractor
end, or if the yoke at the blower end is not
secured properly, the drive shaft can fly
loose with great force, capable of causing
serious injury or death.
Female
Hitch
Male Quick
Hitch
Hitch Locking
Lever
Driveline Coupler
Tractor PTO
Clevis
Clevis
Parallel Bar
Rotation
Handle