Walker IMPLEMENT HITCH SB6670 - Manual (Page 80)

ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Use only genuine Walker ® replacement parts. Effective Date 06-01-01
80
ROTARY BROOM DRIVE COMPONENTS
Gearbox Assembly
1 NS Dipstick Plug (RAD 661741) 1
2 O/L M8 x 45 Bolt 8
3 NS Casing (RAD 661740) 1
4 NS Oil Seal (RAD 661730) 3
5 NS Snap Ring (RAD 661734) 3
6 NS 25.6 x 0.6 Shim (RAD 661733) 1
7 NS Bearing (RAD 661732) 2
8 NS 25.6 x 0.7 Shim (RAD 661731) 1
9 NS Pinion, 29M3.5 (RAD 661735) 1
10 NS Gear Z25M35 (RAD 661738) 1
11 NS Bearing 6205 (RAD 661728) 2
12 O/L M8 Hex Nut 8
13 O/L 3/8-NC x 5 Hex Bolt 4
14 NS Shaft (RAD 661729) 1
15 NS Parallel Key, A8 x 7 x 25 (RAD 660063) 1
16 NS 25.6 x 0.8 Shim (RAD 661737) 1
17 NS 25.6 x 1.0 Shim (RAD 661736) 1
18 NS 3/8 Plug (RAD 661739) 1
19 NS O-Ring (RAD 661144) 1
20 O/L 3/8 Lock Washer 1
21 O/L 3/8 Hex Nut 1
Driveline and Sprockets Assembly
22 6651 Driveline Male Portion Assembly 1
(Includes Items # 23-27)
23 6651-3 Bearing Retainer 1
24 6651-2 Nylon Bearing 1
25 I395 Decal, Rotating Driveline 1
26 6651-1 PTO Outer Shield 1
27 6651-4 Male Shaft and Yoke Assembly 1
28 I378 Chain Drive Shaft 1
29 I120 Bearing Flange 6
30 5609 Bearing (with Set Screw) 3
(Includes Item # F309)
31 O/L 5/16 Lock Washer 9
32 O/L 5/16-NC Hex Nut 9
33 I381 Chain, #40 x 71 Links 1
34 NS Connecting Link #40 (RAD 656153) 1
35 I382 Chain Guard 1
36 O/L 5/16-NC x 3/4 Carriage Bolt 9
37 I380 Drive Sprocket 40B36 1
38 O/L 5/16-NC x 3/4 Set Screw 1
39 I162 1/4 x 1/4 x 1 Key 1
40 O/L 5/16-NC x 5/8 Set Screw 1
41 I387 Chain Idler 1
42 I388 Spacer 1
43 O/L 7/16 ID Flat Washer 1
44 O/L 3/8-NC x 2 Hex Bolt 1
45 I397 Decal, Safety Procedures 1
46 O/L 5/16-NC x 1/4 Set Screw 2
47 I305 1/4 x 1/4 x 1-1/4 Key 1
48 I390 Brush Drive Shaft 1
49 I376 Gearbox, Updated Broom 1
(Includes Items # 1-21)
50 NS Decal, Important - Avoid Damage 1
(RAD 660328)
51 NS Decal, Grease All Points (RAD 658708) 1
52 NS Decal, Brush Ground Contact 1
(RAD 661052)
53 I389 Brush Support Adaptor 1
54 5800 Decal, Walker Mower (4 x 7-1/2) 1
55 I386 Polypropylene Brush, 1 piece 1
NS Brush, 50% Steel / 50% Nylon *
(RAD 661727)
Fasteners
F309 1/4-28 x 1/4 Set Screw 3
* Service Part Only
NOTE: Decals are illustrated in greater detail in the Owner’s sec-
tion of this manual. Refer to SAFETY, CONTROL, AND
INSTRUCTION DECALS in Safety Instructions, Page
17.
NOTE: All NS items are listed with a RAD Part Number (e.g., RAD
657383), and are not sold by Walker Manufacturing. To
order these items, contact:
RAD Technologies Inc.
2835, Chemin de l’Aéroport
Thetford Mines (Québec)
G6G 5R7 CANADA
1-418-338-4499