Samsung SCX-8030ND User Manual
Page 42
Initial settings and testing of the machine_ 42
3. Press the Device Name field.
The pop up keyboard appears.
Remove the existing device name and enter the device name you want to use and then press OK. Then press Next.
Keep in mind to enter the device name to be used on the network.
•
If necessary, enter the location of the machine in the Location field.
•
If necessary, enter the information in the Administrator field for the person to contact when any problem
occurs on the machine.
4. Press the Test button to verify the LAN connection. When Connected appears after pressing the Test button, press
Next.
If Not connected appears, make sure that the machine is connected to the network then verify the LAN connection
again.
•
If a network connection problem persists, contact your network administrator.
•
If you installed an optional fax kit or finisher, press each Test button for verify connection of them.
scx_8040_install_english.book Page 42 Monday, August 30, 2010 4:23 PM