Samsung SCX-8030ND - Manual (Page 44)

Initial settings and testing of the machine_ 44
7. Set the time on the machine. You can set the time manually or use SNTP (Simple Network Time Protocol) to set time
automatically using the time server.
When you press Manual:
a) Set the date, time, time offset using the left/right and up/down arrows.
Example for selecting the time offset: If your local time is 4 hours faster than UTC, press the right arrow until
+4 shows.
b) Press Result to check the Manual setting and then press Close. If necessary, try to set it again.
c) Press Next.
When you press SNTP (Simple Network Time Protocol):
a) Set the date, time, time offset using the left/right and up/down arrows.
Example for selecting the time offset: If your local time is 4 hours faster than UTC, press the right arrow until
+4 shows.
b) If you press IP, go to step c. If you press Host, step e.
c) Press the IP field. The pop-up keyboard appears. Enter a IP address which provides the time information, and then
press OK.
d) Press the Port No field. The pop-up keyboard appears. Enter a port number and then press OK. Go to step f.
e) Press the Host field. The pop-up keyboard appears. Enter a host name manually. You can also press Host List,
and then select a host name in Time Server List and press Close.
f) Press the Port No field. The pop-up keyboard appears. Enter a port number and then press OK.
g) Press Result for checking the SNTP setting and then press Close. If necessary, try to set it again.
h) Press Next.
scx_8040_install_english.book Page 44 Monday, August 30, 2010 4:23 PM