Welch Allyn SCANTEAM 3400PDF - Manual (Page 30)

2–10 SCANTEAM 3400PDF User’s Guide
✱ None Low (500 milliseconds)
Good Read Delay Selection
Medium (1.0 second) High(1.5 second)
High(1.0 second) Extra High(2.0 seconds)
Reread Delay Selection
✱ Low (175 milliseconds) Medium (450 milliseconds)
This selection allows you to set a time period that must pass before the scanner
can read the same bar code again. Setting a reread delay protects against
accidental rereads of the same bar code. Longer delays are effective in
minimizing accidental rereads at POS (point of sale) terminals. Use shorter
delays in applications where repetitive bar code scanning is required.
This selection allows you to set a time period that must pass before the scanner
can read another bar code. Some terminals require a slower read rate. By
setting a good read delay, you can ensure a good read.
✱ Manual Trigger AutoTrigger
AutoTrigger Selection
When enabled, this programming selection allows autoĆtriggering with the
optional Scan Stand. The Scan Stand provides handsĆfree operation in any
application where a great number of bar code entries is required.