Winegard WB-2000 - Manual (Page 16)

4
4. DirecTV Operation
4. DirecTV Overview
When connected to a Winegard automatic satellite antenna, the Winegard HD satellite In-
terface is capable of receiving the following satellites:
101°W - Majority of standard programming
119°W - Standard programming and some HD programming
110°W - Only HD programming. Requires converter
•
•
•
In automatic mode, the satellite antenna will automatically toggle between pairs of user
defined satellites. The toggle feature will work while stationary for all models and in-mo-
tion for in-motion model satellite antennas. The pair can be selected from the main display
of the Satellite Interface. The available satellite pairs are:
101°W and 110°W
101°W and 119°W
You may also operate the satellite antenna in Manual Mode. More information on Manual
Mode is available in Section 7.2.
Press [ENTER] to confirm selection. You are now in the Main Menu.
Press [ENTER] to confirm Satellite Setup.
4. DirecTV First Time Setup
Configure Satellite Interface box for DirecTV programming
Press [Power] to power on the Satellite Interface and Satellite Antenna. The antenna will
begin it’s search for its pre-set satellite.
Access the Main Menu. Press and hold the [ENTER] button for 2 seconds.
Press [SELECT] to choose Yes.
Press [ENTER] to confirm Sat Provider.
From Service Provider menu press [ENTER] to confirm DTV.
Select Yes and press [ENTER] to save setting. The satellite antenna will reset and begin
its search routine for satellite 101°W. Your satellite antenna is now set for DirecTV pro-
gramming.Each time you power on the Satellite Interface, the satellite antenna will locate
DirecTV satellite programming.
Toggle - the dish will
automatically switch satel-
lites by changing channels
on your remote control.
Satellite Interface
POWER SELECT ENTER
Enter User Menu?
Yes No *
Satellite Interface
POWER SELECT ENTER
Satellite Setup*
Enter Sleep
Satellite Interface
POWER SELECT ENTER
Service Provider
*DTV DISH BELL