Winegard WB-2000 User Manual

Page 30

Advertising
background image

8

Exit Sleep Mode

You may force the antenna into Tracking Mode at any time while the system is in Sleep

Mode.

From the Sleep Menu, press [SELECT] to select Exit Sleep Mode.

Press [ENTER] to confirm.

A confirmation message will appear. The antenna will immediately exit Sleep Mode and

enter Tracking Mode.

Set Sleep Time

While in Tracking Mode, if the antenna does not sense movement for a set amount of time,

the antenna will automatically exit Tracking Mode and Enter Sleep Mode. The default

timer is set to 7 minutes.

From the Sleep Menu, press [SELECT] 2 times to select Set Sleep Time.

Press [ENTER] to confirm.

You will enter the Set Sleep Timer menu. Sleep Timer Range is from 0000-1999, and is

measured in seconds. Note: By setting the Sleep Timer to 0000, the Dish will never

enter Sleep Mode. The Dish will constantly track the satellite whether stationary or

in-motion.

Press [SELECT] to increase selected digit by 1. Press [ENTER] to confirm digit and

move to next digit.

After 4th digit is set, press [ENTER] to confirm new time.

You will be prompted to Save Setting. Press [SELECT] to select Yes, then [ENTER] to

confirm. A confirmation screen will appear and you will return to the status screen.

Winegard does not

recommend setting sleep

timer to less than 3 minutes.

Your dish may unexpect-

edly enter sleep mode, such

as at a traffic light or stop

sign.

Satellite Interface

POWER

SELECT

ENTER

Exit Sleep Mode*

Set Sleep Time

Satellite Interface

POWER

SELECT

ENTER

Set Sleep Time*

Default Sleep

Satellite Interface

POWER

SELECT

ENTER

Set Sleep Timer

0420 seconds

Advertising
This manual is related to the following products: