Wolfgang Puck BIBC1050 - Manual (Page 6)

9 10
Beverages
Care & Cleaning
figure 2
1 Unplug the motor base from the outlet.
Remove the Blending Rod Attachment
from the Motor Base for cleaning by
turning it clockwise until the arrow on the
Motor Base is aligned with the unlock
graphic on the Blending Rod. See Figure
2. Clean the Blending Rod in warm, soapy
water. Caution: Blades are sharp. Handle
with care. Do not immerse the Motor
Base, cord or plug in water. Wipe the
Motor Base with a damp cloth only.
2 If food particles are not easily rinsed
off the Blending Rod, place a drop of
dish detergent in a tall mixing container
with one cup of warm water. Attach the
Blending Rod to the Motor Base and
plug cord into outlet. Immerse the blade
portion of the Blending Rod and operate
the unit for about 10 seconds. Unplug and
rinse under hot water, then dry.
3 Simply wipe the Motor Base clean with
a damp cloth. Never hold the Motor Base
under running water or immerse it in
any liquid.
4 Do not use pointed or sharp objects to
remove food particles.
Important: Do not try to sharpen the cutting
edges of the Blending Rod blade. They have
been precision honed at the factory and will
be damaged by any attempted sharpening.
SMImmBlderManual_09 6/25/09 6:04 PM Page 9