WiebeTech SS8 - Manual (Page 8)

W i e b e T e c h L L C
2.2 Product overview
Front view
Figure 2.2.1
Rear view
Figure 2.2.2
Access LED
Power LED
Power Switch
Voltage Switch
Power Input
RS-232 Port
SCSI to Host
Terminator
Ethernet Port
WARNING: Before connecting the
power cable, make sure the voltage
switch is set correctly for your location.
2.3 Install SATA disks
If the hard drives do not come with the RAID system, please follow the
instructions for installation below.
• Press the release button and pull the handle to remove the disk tray. The
trays may have to be unlocked first using the key provided.
• Insert the disk into the disk tray with the connectors directed toward the
open rear of the tray.
• Align the mounting holes of the disk with the tray.
• Mount the disk to the disk tray with the screws provided in the accessory
pack.
ProSATA SS8 User Manual
- 8 -