Waves Multimaximizer L3-LL - Manual (Page 11)

L3-LL User Manual
11
Range -30dB to 0dB
- Default 0dB
The Out Ceiling fader sets maximum output level, scaling the output signal to reach the out ceiling
value but not exceed it.
The Out Ceiling fader is located on the Output Meter. Below the Output Meter are Waves standard
peak indicators. Click the peak indicator field to reset.
Threshold/Out Ceiling Link
The
ut Ceiling/Output Meter O
-
button lets you adjust the Threshold and the Out Ceiling faders simultaneously, allowing
threshold setting changes while monitoring the limiter effect without its makeup gain action.
Attenuation Meter
he Attenuation Meter displays the overall (wideband) attenuation.
Ultramaximizer Profiles
- Range -30dB to 0dB
T
-Range
Basic
Profile
Extreme Analog
Semi Separated
WideBand ARC
WideBand Manual
Cosy & Warm
Lean & Mean
Low Level Loudness
rofile
Loud & Proud
- Default
Basic P
The Profiles drop down menu contains factory settings for the L3-LL Ultramaximizer internal frequency
bands controls. Each Profile contains per band Priority, Release, and Separation settings, otherwise
only available in the L3-Multimaximizer.