Waves Multimaximizer L3-LL - Manual (Page 22)

L3-LL User Manual
22
ttons
window to adjust. Some value windows support
, arrows will appear to let you know which
then use up/down –
left/right (depending on the direction supported by that button) to move in the smallest
tton’s range (holding down the arrow keys will move faster
through the range).
• Using key entry, double click on the button to open the value window, and directly enter the
value from your keyboard. If you enter an out of range number, the button stays selected but
-drag
der track. The numerical value of the slider settings is
ontrols
an m tions:
• Click- diagonal drag will adjust gain and frequency together.
k (PC)/ Command-click (Mac) and drag constrains movement to the X or Y
l drag will lock frequency but allow gain change, and horizontal drag will lock gain
• Option/Command-click (Mac only, not supported on PC) to change filter type.
Value Window Bu
Value windows display the value of a control and allow click-and-drag adjustment, or direct control
via the keyboard.
• Using the mouse, click-and-drag on the value
left/right, some up/down (as you hover over a button
direction of movement that button supports).
• Using the arrow keys, click once with mouse to select the button, and
incremental steps across the bu
remains at the current setting (system beeps? If system sounds are on?)
Some processors have link buttons between a pair of value windows, allowing click-and
adjustment while retaining the offset between the controls.
Faders
lick on the fader itself or anywhere within the fa C
displayed in a window above the slider path. When pairs of faders are provided for stereo c
uch as in the Q10) click-and-drag between the faders will adjust both faders together (maintaining any (s
offset between them if there is some)
Band Markers
B d arkers appear on all Waves graphic displays, and have many func
• Click-vertical drag changes gain.
• Click-horizontal drag changes frequency.
• Control-clic
axis – vertica
but allow frequency change.
• Alt-click (PC)/ Option-click (Mac) and horizontal drag allows Q adjustment.
• Shift-click to select multiple band markers for simultaneous control, and shift-click again on
any marker you wish to de-select.
• Double click (PC) / Command-click (Mac) on any band marker to toggle in or out.
• Drag on any de-activated band marker to re-activate it .