Waves Multimaximizer L3-LL - Manual (Page 14)

L3-LL User Manual
14
Main Display
The Gain/Frequency graph displays the peak attenuation across the frequency range.
ƒ The top purple line is the applied Gain curve.
ƒ The orange line is the Dynamic Gain line and shows Gain changes as they happen.
ƒ The semi-transparent purple shade displays a smoothed trail of the Dynamic Gain line.
The lower gray line is the Dynamic Gain peak hold which displays the maximum attenuation
across the frequency spectrum.
ers which, when moved left or right, adjust the bands’ width, and when
oved up or down, adjust the linked Gain and Priority.
lick-vertical drag the band markers changes gain and priority
ƒ Click-horizontal drag the band markers changes frequency bandwidth
r Y
ƒ Double click on any band marker to toggle in or out
ƒ
The graph also includes 5 mark
m
The graph also has 4 line markers that display and allow adjustment of the crossover frequencies.
ƒ C
ƒ Control-click (PC)/Command-click (Mac) and drag constrains movement to the X o
axis – vertical drag will lock frequency but allow gain change, and horizontal drag will
lock gain but allow frequency change
ƒ Alt-click (PC)/Option-click (Mac) and horizontal drag allows Q adjustment, and
disables the vertical axis while held
ƒ Shift-click to select multiple band markers for simultaneous control; shift-click again on
any marker you wish to de-select
Dynamic Gain Line
Momentary Attenuation
Frequency
Band Marker
Peak Attenuation
Hold Curve
Attenuation
Range
Gain
Curve
Crossover
Cutoff Marker