Waves EQ Sampling System Q-Clone - Manual (Page 24)

6. Open your Logic session and open a new Audio file (which will be
dedicated to the Q-Capture).
7. On this track, assign the input of the channel to the input of your audio
card that receives the hardware output cable ( input Y ).
8. Also on this track assign the output of the channel to the output of your
audio card that receives the hardware input cable ( output X ).
9. Click the Rec button of this channel On and hit play and stop to
activate the plug-in. One this is happening you automatically see the
signal from the plug in the channel’s meter.
Waves Q-Clone Manual 24