Waves EQ Sampling System Q-Clone - Manual (Page 32)

Waves Q-Clone Manual 32
Q-C
LONE
T
ROUBLESHOOTING
C
HECK
L
IST
:
Problem Synopsis
Action
I’m capturing a flat
device setting but the
curve in the Q-Clone is
not flat - Curve is smooth but
not flat. This is
probably representing
the current state of
your analog system.
- Curve is drastically
unfelt and/or full of
ripples.
- Try closing the loop in your
I/O.
- Try a digital loop.
- Try other I/O or other
devices
I have calibrated using
Q-Capture and my
device is flat, but the
curve in the Q-Clone is
off the 0 DB axis. The analog system’s
imperfections lead to
difference between
peak level alignment
and frequency
response alignment. -Refer to the calibration
section on page 11.
Q-capture shows
“Waiting” on both of its
display meters. Q-Capture is non-
functional as a result
of insufficient
initialization. - Check to see if the host
application appears in the
supported application list of
the Q-Clone.
- Check if the Track I/Os are
routed correctly.
- Try playing/stopping the
session.
Q-Capture shows
“Waiting” on its upper
display meter only. Capturing loop is not
Closed. -Check your cable
connections according to the
quickest section.
-Check your track’s I/O
routing.