Yamaha CLP-130 - Manual (Page 11)

CLP-130/120 Before Using the Clavinova
ENGLISH
11
Turning the Power On
1. Connect the power cord.
Insert the plugs at the ends of the cord, one into the AC INLET on the Clavinova, and the other into a standard AC
outlet.
In some areas, a plug adaptor may be provided to match the pin configuration of the AC wall outlets in your area.
(The shape of plug differs depending on locale.)
2. Turn the power on.
Press the [POWER] button.
• The display located in the center of the front panel and the power indicator located below the left end of the key-
board lights up.
When you’re ready to turn off the power, press the [POWER] button again.
• The display and the power indicator turn off.
Setting the Volume
Initially set the [MASTER VOLUME] control about halfway between the “MIN” and “MAX” settings. Then, when you start
playing, re-adjust the [MASTER VOLUME] control to the most comfortable listening level.
CAUTION
Do not use the Clavinova at a high volume level for a long period of time, or your hearing may be damaged.
TIP Power indicator
If you close the key cover without turning the power off, the power indicator remains lit, indicating that the
power is still on.
(bottom surface)
1 2
Power indicator
[POWER]
Normally indicates tempo.
Display
TERMINOLOGY MASTER VOLUME:
The volume level of the entire keyboard sound
TIP You can also adjust the [PHONES] output level and the AUX IN input level using the [MASTER VOLUME] slider.
MASTER VOLUME
MIN MAX
The level decreases. The level increases.