Yamaha CLP-130 - Manual (Page 12)

CLP-130/120 Before Using the Clavinova
ENGLISH
12
Using Headphones
Connect a pair of headphones to one of the [PHONES] jacks.
Two [PHONES] jacks are provided.
You can connect two sets of standard stereo headphones. (If you are
using only one pair of headphones, you can plug them into either
jack.)
Using the Headphone Hanger
A headphone hanger is included in the CLP-130/120 package so that you can
hang the headphones on the Clavinova. Install the headphone hanger using
included two screws (4
×
10mm) as shown in the figure.
CAUTION
Do not hang anything other than the headphones on the hanger. Otherwise,
the Clavinova or the hanger may be damaged.
Using the Speaker Switch
This switch turns the internal speakers on or off.
NORMAL (HP. SW) ......... The speakers produce sound as long as a pair of headphones is not con-
nected.
ON ....................................... The speakers always produce sound.
OFF ...................................... The speakers produce no sound.
PHONES
SPEAKER
NORMAL
OFF
ON
HP. SW
standard stereo
phone plug
bottom surface
PHONES
SPEAKER
NORMAL
OFF
ON
HP. SW