Yamaha CLP-130 - Manual (Page 38)

CLP-130/120 Detailed Settings – [FUNCTION]
ENGLISH
38
Basic Procedure in Function Mode
Follow the steps below to use the functions.
(If you become lost while using a function, return to this page and read the basic procedure.)
1.
Engage Function mode.
Press the [TEMPO/FUNCTION#] button so that its [FUNCTION#] indicator
lights.
will appear on the display. (The indication of “ ” varies depending on
the status of the unit and usage.)
2.
Select a function.
Use the [TEMPO/FUNCTION# ▼ , ▲ ] buttons to select the desired function
from F1–F9 (CLP-130) / F1–F8 (CLP-120).
3.
Use the [–/NO] [+/YES] buttons.
If the function does not include sub-modes, start setting the parameters.
If the function includes sub-modes, press the
[+/YES] button once to enter the
respective sub-mode.
4.
Operate the desired function using the following
two buttons.
1 [TEMPO/FUNCTION# ▼ , ▲ ]
Selects the desired function/sub-mode.
2 [–/NO] or [+/YES]
After you select the desired function or sub-mode, set the ON/OFF, select
the type, or change the value, accordingly.
Depending on the setting, the default setting (which is used when you
first turn on the power to the Clavinova) is recalled by pressing the
[–/
NO] and [+/YES] buttons simultaneously.
3 1 2 4 4 5
MASTER VOLUME
BRILLIANCE DEMO METRONOME TEMPO / FUNCTION
TEMPO/ OTHER VALUE
MELLOW BRIGHT
START/ STOP
TEMPO
FUNCTION
MIN MAX
– /NO +/ YES PRESET
USER 1
USER 2
TRACK 1 TRACK 2 START/ STOP REC
GRAND
PIANO 1
CHURCH ORGAN
E.PIANO
1
STRINGS
E.PIANO
2
HARPSI-
CHORD
E.CLAVI-
CHORD
VIBRA-
PHONE
CHOIR GUITAR E.BASS SPLIT
ROOM
HALL 1
HALL 2
STAGE CHORUS
PHASER
TREMOLO
DELAY
HARD
MEDIUM
SOFT
ON
VARIATION
GRAND
PIANO 2
JAZZ ORGAN WOOD BASS USER 3
VOICE REVERB EFFECT TOUCH TRANSPOSE SONG
Procedure
NOTE
Functions cannot be selected
during Demo/Preset Song
mode or when the user song
recorder is in operation.
NOTE
To cancel the function in Step 2,
3, or 4, press the
[TEMPO/
FUNCTION# ▼ , ▲ ] button any
time to exit Function mode.
TEMPO / FUNCTION
TEMPO
FUNCTION
TIP
After you select the function, the
current setting will be displayed
when the
[–/NO] or [+/YES] but-
ton is pressed for the first time.