Yamaha CLP-130 - Manual (Page 27)

CLP-130/120 Selecting & Playing Voices
ENGLISH
27
Splitting the Keyboard Range and Playing Two Dif-
ferent Voices (Split mode) (CLP-130)
Split mode enables you to play two different voices on the keyboard — one with the left hand and
another with the right hand. For example, you can play a bass part using the Wood Bass or Electric
Bass voice with the left hand, and a melody with the right hand.
1.
Engage Split mode.
Press the [SPLIT] button so that its indicator lights. The default setting (WOOD
BASE) will be selected for the left-hand voice at first.
The Function mode provides access to a number of other Split mode functions
(page 43). (If you make no settings for Split mode functions, the appropriate
setting will be set in each voice by default.)
2.
Specify the split point (the border between the
right-and left-hand range).
You can change the split point to any other key by pressing the key while hold-
ing the
[SPLIT] button (the name of the current split-point key appears on the
LED display while the [SPLIT] button is held).
The split point is initially set at the F 2 key by default.
If you do not need to change the split point, skip this procedure.
Voice buttons [SPLIT]
MASTER VOLUME
BRILLIANCE DEMO METRONOME TEMPO / FUNCTION
TEMPO/ OTHER VALUE
MELLOW BRIGHT START/STOP
TEMPO
FUNCTION
MIN MAX
— /NO +/ YES PRESET
USER 1
USER 2
TRACK
1
TRACK
2
START/STOP REC
GRAND PIANO 1
CHURCH
ORGAN
E.PIANO 1
STRINGS
E.PIANO 2 HARPSI- CHORD E.CLAVI- CHORD VIBRA- PHONE
CHOIR GUITAR E.BASS SPLIT
ROOM
HALL 1
HALL 2
STAGE CHORUS
PHASER
TREMOLO
DELAY
HARD
MEDIUM
SOFT
ON
VARIATION GRAND PIANO 2
JAZZ
ORGAN
WOOD
BASS USER 3
VOICE REVERB EFFECT TOUCH TRANSPOSE SONG
Procedure
NOTE
Dual (page 26) and Split
(page 26) modes cannot be
engaged simultaneously.
TIP
A specified “split point” key is
included in the left-hand range.
TIP
The split point can also be set
via Function 4 (page 43).
An example of split-point key display
(F 2)
followed by a high bar if sharp
(G2) (A 2)
followed by a low bar if flat