Zanussi ZOD370 - Manual (Page 14)

Removing the side rails
Pull the rails away from the
oven wall at the front
Unhook them at the back
Replace the side rails
Important! Important The rounded ends of the guide bars
must point to the front.
To install, first (1) and then .
1
2
Insert the rails in the holes
at the back
Lower into position at the
front and press them at the
back
Oven back lamp (for selected models only)
Warning! Risk of electric shock! Before replacing
the oven light bulb:
– Switch oven off.
– Unscrew the fuse from the fuse box or switch fuse off.
To protect the oven light bulb and the glass cover,
lay a cloth on the floor of the oven.
Replacing the oven light bulb/Cleaning the glass cover
1. Take off the glass cover by turning it anticlockwise
and clean it.
2. If necessary:
replace with a 40 Watt, 230V, 300°C heat-resistant
oven light bulb .
3. Refit the glass cover.
Replacing the side oven lamp/Cleaning the glass
cover (for selected models only)
1. Take out the left-hand side rails.
2. Remove the glass cover with the help of a small, blunt
object (e.g. a teaspoon) and clean it.
3. If necessary: replace halogen oven light bulb.
Order the replacement light bulb from the Customer
Care Department (see section "Service/Customer
Care Department").
Always touch the halogen light bulb using a cloth
to avoid grease contamination.
4. Refit the glass cover.
5. Replace the side rails.
14