Zanussi ZOD370 User Manual
Page 21
2x 3,5x25
Electrical Installation
• Enquiries regarding the installation of the cooker point,
if required, should be made to your Regional Electricity
Company to ensure compliance with their regulations.
• The appliance socket switch should be outside the
cabinet but within 2m of the appliance to make it ac-
cessible to switch off the appliance in case of an emer-
gency.
• To protect the hands, wear gloves when lifting the oven
into its housing.
Important! HOUSE CIRCUIT
Earth leakage and continuity tests must be carried out
before the appliance is connected to the mains supply and
re-checked after fitting.
GETTING THINGS READY CHOICE OF ELECTRICAL
CONNECTION
There are three possible ways to connect your appliance.
In each case the appliance should be operated using at
least 6mm² twin core and earth PVC insulated multicore
cable. Please choose from the most appropriate after
reading the different methods :
a) By connecting to a cooker point (having a double pole
isolating switch with at least 3mm contact separation
in all poles and neutral) and protected with a fuse or
miniature circuit breaker at your mains fuse box.
b) By connecting the appliance together with a hob di-
rectly to a cooker point(s). Having a double pole iso-
lating switch with at least 3mm contact separation in
all poles and neutral.
c) If you wish to connect an oven and a hob to a cooker
point you can by connecting the oven and hob sep-
arately to the cooker point. Oven and hob units should
be separately connected to a cooker point. (See Pic-
ture)
1
3
2
1
Cooker Point
2
Hob
3
Oven
It is good practice to :
– Fit an Earth Leakage Circuit Breaker to your house
wiring.
– Wire your appliance to the latest IEE regulations.
21