Speaker wiring indications, Press standby/on to turn on the cinemastation, Press on/off during the setup procedure – Yamaha DVR-S150 User Manual
Page 27
Auto Speaker Setup (YPAO)
22
4
Press STANDBY/ON to turn on the
CinemaStation.
5
Press AMP, then press YPAO to start the
setup procedure.
Test tones (the volume is adjustable) are output from
each speaker, and the display changes as follows.
Check that the speaker from which the test tone is
being output and the name of the speaker appearing
in the display are the same.
6
Press YPAO once more to continue the setup
procedure.
“AUTO SETUP” appears in the display, and
measurement begins. Test tones are output from each
speaker in turn, and the display changes as follows.
The progress status appears in the display as a
percentage (normally, it takes about two minutes).
If the setup procedure is successful, “YPAO ON” and
the speaker connection status appear alternately in the
display. For information on the speaker connection
status, refer to “Speaker wiring indications” below.
If a warning is detected, “WARNING” and the
speaker connection status appear alternately in the
display. For details, refer to “Error and warning
messages” (page 24).
■
Speaker wiring indications
2.0 F – – – :
Front speakers only
2.1 F – – SW :
Front speakers and the subwoofer
3.0 F C – – :
Front speakers and the center speaker
3.1 F C – SW :
Front speakers, center speaker and the
subwoofer
4.0 F – SR – :
Front speakers and surround speakers
4.1 F – SR SW :
Front speakers, surround speakers and
the subwoofer
5.0 F C SR – :
Front speakers, center speaker and
surround speakers
5.1 F C SR SW :
Front speakers, center speaker,
surround speakers and the subwoofer
■
To cancel YPAO mode during setup
Press ON/OFF during the setup procedure.
TV
POWER
AUDIO
SELECT
NIGHT
SW
TV CH
TV INPUT
CENTER
SURR
SHIFT
STEREO
MATRIX 6.1
A-B
REPEAT
ANGLE
SUBTITLE
STANDBY/ON
SURROUND
SET MENU
STANDBY/ON
(
)
CH
CH
PRESET
PRESET
ON SCREEN
MENU
TEST
RETURN
STATUS
TV VOL
VOLUME
MUTE
AMP
DVD/CD
VCR
VIDEO
ENTER
YPAO
ON/OFF
START
START
PTY SEEK
MODE
FREQ/RDS
AMP
YPAO
TEST LEFT
TEST CENTER
TEST RIGHT
TEST R SUR.
TEST L SUR.
TEST SWFR
OK?
TEST LEFT
TEST CENTER
TEST RIGHT
TEST R SUR.
TEST L SUR.
TEST SWFR
OK?
CH
CH
PRESET
PRESET
ON SCREEN
MENU
TEST
RETURN
STATUS
TV VOL
VOLUME
MUTE
AMP
DVD/CD
VCR
VIDEO
ENTER
YPAO
ON/OFF
START
START
PTY SEEK
MODE
FREQ/RDS
ON/OFF