Yamaha DVR-S150 User Manual
Page 28
Auto Speaker Setup (YPAO)
23
B
A
SIC OPERA
T
ION
■
To turn the YPAO mode on/off
You can switch between speaker settings configured by
YPAO and manual setup by turning on/off the YPAO
mode.
1
Press AMP.
2
Press ON/OFF to display the currently
selected mode, then press ON/OFF again to
select “YPAO ON” or “YPAO OFF”.
•
YPAO ON:
The CinemaStation uses speaker
settings configured by YPAO. If an error occurs
during testing, this changes to “W YPAO ON”.
•
YPAO OFF:
The CinemaStation uses speaker
settings configured by manual setup.
y
• If a warning occurs during the YPAO measurement process,
“W YPAO ON” appears in the display. If this happens, use
or
to switch the display.
• If you select “YPAO OFF”, settings are returned to their
previously set values.
• In the YPAO mode, you can make fine adjustments for YPAO
speaker settings such as level and distance, etc.
• If you make fine adjustments to your YPAO speaker settings,
these are reflected whenever you select the YPAO mode.
Notes
CH
CH
ON SCREEN
MENU
TEST
RETURN
STATUS
TV VOL
VOLUME
MUTE
AMP
ENTER
YPAO
ON/OFF
START
AMP
ON/OFF