Diving with the gekko, Basic dive data – SUUNTO Gekko User Manual

Page 22

Advertising
background image

20

The STOP sign will appear in the display and when

you reach the depth zone between 6 m to 3 m [20 ft

to 10] also the CEILING label, ceiling depth and the

calculated Safety Stop time appear in the display. You

should wait until the Mandatory Safety Stop warning

disappears (Fig. 3.13.).
The Mandatory Safety Stop time always includes the

three minute Recommended Safety Stop time. The total

length of the Mandatory Safety Stop time depends on

the seriousness of the ascent rate violation.
You must not ascend shallower than 3 m [10 ft] with

the Mandatory Safety Stop warning on. If you ascend

above the Mandatory Safety Stop ceiling, a downward

pointing arrow will appear and a continuous beeping

starts (Fig. 3.14.). You should immediately descend to,

or below, the Mandatory Safety Stop ceiling depth. If

you correct this situation at any time during that dive,

there are no affects on the decompression calculations

for future dives.
If you continue to violate the Mandatory Safety Stop,

the tissue calculation model is af fected and the di ve

computer shortens the a vailable no-decompression

time for your next dive. In this situation, it is recom-

mended to prolong your surf ace interval time before

your next dive.

3.3. DIVING WITH THE GEKKO

The GEKKO has two operating modes: Air mode for

diving with standard air only and Nitrox mode for div-

ing with oxygen enriched (EANx) mixtures. The Ni-

trox mode is enabled in the MODE-SET-MODEL.

3.3.1. Basic Dive Data

The dive computer will remain in the Surface mode at

depths less than 1.2 m [4 feet]. At depths greater than

1.2 m the instrument will go into the Di ving mode

(Fig. 3.6.).

Fig. 3.6. Dive starts

Fig. 3.7. Diving display.

Present depth is 19.3 m [63

ft] and no-decompression

stop time limit is 23 minutes

in A0/P1 mode. Maximum

depth during this dive

was 19.8 m [65 ft], water

temperature is 18¡ C [64¡F],

elapsed dive time is 16

minutes. Alternative display

of current time 10:20 [10:20

am] is shown for 5 seconds

after pressing TIME button.

°

C

TIME

DIVE

m

NO DEC TIME

T

C

B

MAX

m

NO DEC TIME

T

C

B

°

C

MAX

DIVE TIME

MAX

TIME

Advertising