Dive numbering, Flying after diving – SUUNTO Gekko User Manual

Page 33

Advertising
background image

31

Symbol

on display

Indication

Violated Decompression Ceiling

Do Not Fly Symbol

Diver Attention Symbol - Extend Surface Interval

NO

TABLE 3.3. WARNING SYMBOLS

If set to Nitrox mode, the following information will

also be shown:
- the oxygen percentage labeled with O2% is

shown on the left side of the center window

- the current oxygen toxicity exposure shown

with an Oxygen Limit Fraction (OLF) bar

graph along the left side of the display.

3.5.2. Dive Numbering

Several repetitive dives are considered to belong to

the same repetitive dive series when the dive compu-

ter has not counted the no-fl ying time to zero. Within

each series, the dives are given individual numbers.

The fi rst dive of the series will be numbered as DIVE

1, the second as DIVE 2, the third as DIVE 3, etc.

Fig. 3.28. Surface interval,

no-fl ying time. Pressing

TIME button twice will

show no-fl ying time, indi-

cated by an airplane symbol.

MAX

°

C

TIME

NO

m

If you start a ne w dive with less than 5 minutes of

surface interval time, the dive computer interprets this

as a continuation of the previous dive and the dives

are considered to be the same. The diving display

will return, the dive number will remain unchanged,

and the dive time will begin where it left of f. After

5 minutes on the surf ace, subsequent dives are, by

defi nition, repetitive. The dive counter displayed in

the Planning Mode will increment to the next higher

number if another dive is made.

3.5.3. Flying After Diving

The no-fl ying time is sho wn in the center windo w

next to the airplane image. Flying or tra velling to

a higher altitude should be a voided at any time the

computer counts down the no-fl ying time.

Advertising