Consumed bottom time (cbt), Ascent rate indicator – SUUNTO Gekko User Manual

Page 24

Advertising
background image

22

3.3.3. Consumed Bottom Time (CBT)

The available no-decompression stop time is also shown visually in the multi-

function bar graph on the left side of the display (Fig. 3.7. and 3.8.). When your

available no-decompression time decreases below 200 minutes, the fi rst (lowest)

bar graph segment appears. As your body absorbs more nitrogen, more segments

start to appear.
Green Zone - As a safety precaution Suunto recommends you should maintain

the no-decompression bar graph within the green zone. Segments start to appear

when the available no-decompression time decreases below 100, 80, 60, 50, 40,

30 and 20 minutes.
Yellow Zone- As the bars reach the yellow zone, your no-decompression stop time

is less than 10 or 5 minutes and you are getting very close to no-decompression

limits. At this point, you should start your ascent towards the surface.
Red Zone - As all of the bars appear (red zone), your no-decompression stop time

has become zero and your dive has become a decompression stop dive (for more

information see section 3.3.5. “Decompression dives”).

3.3.4. Ascent Rate Indicator

The ascent rate is sho wn graphically along the right side of the display as fol-

lows:

Ascent Rate Indicator

The equivalent ascent speed

Example in Fig.

No segments

Below 4 m/min [13 ft/min]

3.7

One segment

4 - 6 m/min [13 - 20 ft/min]

3.8

Two segments

6 - 8 m/min [20 - 26 ft/min]

3.9

Three segments

8 - 10 m/min [26 - 33 ft/min]

3.10

Four segments

10 - 12 m/min [33 - 39 ft/min]

3.11

Four segments,

Above 12 m/min [39 ft/min] or

3.12

the SLOW segment,

continuously above 10 m/min

blinking depth

[33 ft/min]

reading, the STOP

sign and an

audible alarm

TABLE 3.2. ASCENT RATE INDICATOR

Advertising