Yamaha EX5R - Manual (Page 207)

207
Song Mode
Press [JOB] key on the panel while in Song mode to
enter Song Job mode. When you enter the Song Job
mode, the following menu will be displayed. There are
22 types of jobs in Song Job mode. The jobs are divided
into three groups JOB1~3. Press [F2] (JOB1), [F3]
(JOB2) or [F4] (JOB3) to select a menu. The
Undo/Redo function is assigned to [F7] which cancels
the changes you made in your most recent job
operation.
Steps for Executing a Job
1When in the Song Play mode, select the song track
that you want to execute job operation.
2Press [JOB] to enter the Song Job mode.
3Press [F2] (JOB1), [F3] (JOB2) or [F4] (JOB3) to
select a menu. The selected menu will be displayed.
4Move the cursor to a job and press [ENTER]. The
selected job screen will be displayed.
You can also display each job by pressing [F1]~[F8]
while holding down [SHIFT].
5Move the cursor to a parameter and use the
[INC]/[DEC], Data Dial, numeric keypad, or the
Knobs 1~6 to set values.
Depending on the selected job it may not be necessary
to set values.
6Press [ENTER]. The following pop-up menu will
appear, prompting confirmation of the operation.
7Press [YES] to execute the job. “Completed!” will
momentarily appear in the screen indicating that the
job has been executed and the previous screen will
be displayed.
Press [NO] to cancel the job.
“Executing...” will appear when the Song Job takes
some time to execute. Take note that if the power is
turned off while “Executing...” is displayed, the data
may be destroyed.
8Press [EXIT] twice to exit the Song Job mode and
return to the Song
[F2]: JOB1
Press [F2] (JOB1) and JOB1 menu will be displayed.
There are six jobs that are executed in units of song
tracks.
1. Clear Song (Erases all of the song data.)
2. Copy Track (Copies specific track data onto another
track.)
3. Clear Track (Clears all data from the designated track.)
4. Mix Track (Mixes one track into another.)
5. Normalize Effect (Applies the Play Effects settings
permanently to each track.)
6. Time Stretch (Expands or compresses all timing over
designated range for specific track.)
1. Clear Song
This job erases all track data from a song and initializes
the song’s Play Effects and other settings.
Song/E/qx 5/21/98 11:41 AM Page 207