Yamaha EX5R - Manual (Page 267)

Disk Mode
267
■ Sample destination data (To)
The destination that can be selected will differ
depending on the setting designated in “From.”
❏ Settings:
The samples of WAV, AIFF and AKAI file types can be
loaded. As to the WAV and AIFF files, you can select “1
file” or “all files” as the source. When “1 file” is selected,
the currently displayed file will be loaded. When “all files”
is selected, all the WAV (or AIFF) files in the designated
directory will be loaded.
As to the AKAI files, you can load its data via the floppy
disik drive and CD-ROM drive only.
[F5]: SMF (MIDI File)
Loads an ESEQ file with the extension “.ESQ” or a
MIDI file with the extension “.MID” from the disk into
the internal memory.
For more information on ESEQ file format, see File Type
on page 261.
When a Standard MIDI file and ESEQ file co-exist on
the same disk, both files will be displayed in the same
screen.
❏ Settings:
Device name/directory (source)
File number (source)
Direct Play function
With the SMF format 0 file, a file can be played
back without loading. Select a SMF format 0 file,
push [F6] and playback will start immediately. In
this case the data is not loaded into the internal
memory, it is merely read directly from the disk and
played back. This is particularly convenient for
auditioning songs quickly. For more information on
Direct Play, see File Type on page 261.
The type of destination data
Device name/directory (source)
File type and file number/name (source)
Source data (From):
All Data
0001~1024
Destination (To):
All Data
Wave DRAM or FLASH (0001~1024)
[F6]: SONG
Loads a song file from the disk into the internal
memory. Data such as Play Effects, Track Transmit
Channel and Controller data is included in a song file.
❏ Settings:
Device name/directory (source)
File number (source)
[F7]: PTN (Pattern)
Loads a pattern file from the disk into the internal
memory. Data such as Play Effects, Track Transmit
Channel and Controller data is included in a pattern
file.
■ Pattern source data (From)
(If necessary select the source data device,) move the
cursor to a file number, and select a source file for
the load operation. A pattern file (50 patterns) can
be loaded. Furthermore, one pattern can be
designated and loaded. In this case, only a specified
pattern number will be replaced with the newly
loaded data.
The type of destination data
Device name/directory (source)
The type of source data
File type and file number/name (source)
The type of destination data
Device name/directory (destination)
File type and file number/name (source)
Disk4pdf/E/qx 3/15/99 8:41 PM Page 267