Yamaha EX5R - Manual (Page 257)

Arpeggio Mode
257
■ Measure
❏ Settings: 01~16 (for the beginning measure and the end
measure)
■ Rate
❏ Settings: 000%~100%~200%
■ Offset
❏ Settings: –9999~+0~+9999
4. Modify Velocity
This job alters the velocity of the notes in the specified
range. The velocity refers to the strength at which a
key is pressed. You can change the velocity using two
types of parameters: the Rate and Offset.
The volume may differ depending on the selected voice
that has a different velocity settings in the Voice Edit
mode.
For more information on functions and each parameter,
see page 216, Modify Velocity in Song Job mode.
■ Track
❏ Settings: 1~4
■ Measure
❏ Settings: 01~16 (for the beginning measure and the end
measure)
■ Rate
❏ Settings: 000%~100%~200%
■ Offset
❏ Settings: –99~+0~+99
5. Transpose
This job lets you transpose in semitones the notes in
the designated range of a specified arpeggio track.
For more information on functions and each parameter,
see page 217, Transpose in Song Job mode.
■ Track
❏ Settings: 1~4
■ Measure
❏ Settings: 01~16 (for the beginning measure and the end
measure)
■ Transpose
❏ Settings: –99~+0~+99
6. Shift Note
This job replaces all occurrences of a specified pitch
(within the designated range of the specified arpeggio
track) with some other pitch.
For more information on functions and each parameter,
see page 217, Shift Note in Song Job mode.
■ Track
❏ Settings: 1~4
■ Measure
❏ Settings: 01~16 (for the beginning measure and the end
measure)
■ From Key: Oct
❏ Settings:
Key Number: 1~16
Octave: -4~0~+3
Arpeggio/E/qx 5/21/98 11:51 AM Page 257