Yamaha CVP-103M EN - Manual (Page 143)

143
CVP-103
C Select the destination song number.
If you selected DISK1 — 1 as in step 1, press the SONG button, then
use the data dial or [–] and [+] buttons to select a destination song
number between
1 and 60. (Song numbers above 60 cannot be se-
lected.)
➔ If the destination song number already contains data, the name of
the song file will appear in the middle section of the display. In this
case, the original data of the destination song number will be re-
placed by the source song data when you execute the copy opera-
tion.
V Execute the copy operation.
The copy operation cannot be executed if
the same song number is selected as
both the source song and the destination
song for the DISK1 – 1 function. In this
case, a “Select a different number!”
message will appear.
Press the COPY button.
➔ The copy operation begins. If you are copying to the same disk, an
“ Are you sure? ” message is displayed. Press the YES button to
continue or the NO button to cancel.
If you are copying the data to a different disk (or copying an entire
disk), a “
Number of disk exchanges (** ** ** ** **)” message appears
to indicate the number of times the disk will have to be changed.
Press the
OK button to continue, or the CANCEL button to abort the
operation.
When copying data between disks, follow the instructions in the dis-
play, inserting the source and destination disks as required.
If you are using the DISK1 – 2 function to copy a song to another
disk, the “ Select destination song number” message will
appear the first time you insert the destination disk. Use the data dial
or [–] and [+] buttons to select a destination song number between
1
and 60. (Song numbers above 60 cannot be selected.)
➾ If the destination song number already contains data, the song
name will appear in the display. In this case, the original data of
the destination song number will be replaced by the source song
data. Press the OK button to continue, or CANCEL to abort.
Copying Commercial Software
• Copying of commercially available
software is strictly prohibited, except
for your personal use.
• Some commercially available software
is purposely copy-protected, and can-
not be copied using these functions.
Data files (other than those made with
the CVP-109/107/105/103) that have
been copied once cannot be copied a
second time to another disk. Also, addi-
tional data can be recorded only to the
right-hand/left-hand parts of the copied
DOC files.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Disk
141