Yamaha CVP-103M EN - Manual (Page 18)

18
CVP-103
You can use either of the methods described previously to change the current voice
selection. Just press RIGHT1 VOICE and hold the button down, or use the data dial or
the [+] button to scan through the options. Try listening to a few of the voices while
you’re at it…
Changing a Setting in a Menu Display
Voice
A voice is one of the sounds
the Clavinova uses to make
music.
The problem with this method is that it can be hard to find the voice you’re looking
for — after all, the Clavinova has more than 600 voices! So you’ll probably want to use
a menu display to see what your choices are. Try pressing the [PIANO] button now.
When you press one of the VOICE buttons, the LCD displays a new set of
functions listing the voices of that type. You should now be looking at a menu of
piano voices.
■ Using the LCD buttons
.................................................................................................
Each piano voice in this display is listed as a separate function in a rounded rectan-
gle. This means that you can use the LCD buttons to select voices, just like you did to
select the
KBD VOL and RIGHT1 VOICE functions at the beginning of this tutorial.
Menu displays
You will use menu displays for
only two purposes: to select a
voice, as shown here, or to
select an accompaniment style
(page 49).
Keep in mind that you can use the data dial or [–] and [+] buttons to select
functions only when viewing a menu display. In other displays, these controls
will change the value of the currently selected function instead.
Try selecting different piano voices in this display before you move on to the
next step.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Using the LCD Display Controls
Refer to page 29 for more
details about selecting voices.
Use the data dial or
[–] and [+] buttons to
select a voice.
16
PIANO E. PIANO GUITAR
SYNTHE-
SIZER
■ Using the data dial or [–] and [+] buttons
................................................
There is another way to select voices in this display. You can use the data dial
or the [–] and [+] buttons to change the selection. Press [–] or turn the data dial
counterclockwise to select a voice to the left; press [+] or turn the dial clockwise
to select a voice to the right.
Press an LCD button to select the corresponding voice.