Yamaha CVP-103M EN - Manual (Page 47)

47
CVP-103
■ Changing the Effect Type
.........................................................................
You can change the effect type selection in the EFFECT page. Select
an effect type using the TYPE ▲ and ▼ buttons, or highlight the TYPE
function and use the data dial or the [–] and [+] buttons.
Effect Type
• Settings: See table on page 163.
• Basic setting: Depends on voice.
To reset the effect type to its basic setting, simultaneously press the
EFFECT TYPE ▲ and ▼ buttons or the [–] and [+] buttons.
➔ The selected effect type is highlighted.
Because the basic setting of the effect type depends on the voice, the
effect type may change automatically when you select a different voice.
• The effect type selection affects all
keyboard parts. Different settings
cannot be made for each part.
• When the basic setting of the [EF-
FECT] button is ON for two or three
voices selected in Dual and/or Split
mode, the Clavinova will automatically
select the most appropriate effect type
and set the effect depth (page 48) for
each part to an appropriate level.
• Depending on the selected voice, the
depth of the effect may sound stronger
or weaker, even though the same
effect type is selected.
• If both the [EFFECT] and [REVERB]
buttons are turned on, both effects will
be applied.
Voice Effects
X Use the PAGE [<] and [>] buttons to switch between the EF-
FECT and EFFECT DEPTH pages.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
➔ The value displayed by the VARIATION function switches be-
tween OFF and ON , and the effect changes.
The way in which the effect changes depends on the effect type (see
the table on page 163). Also, because the basic setting of the VARIA-
TION function depends on the voice, the setting of this function may
change automatically when you select a different voice.
■ Varying the Effect
.............................................................................................
Each of the Clavinova’s effect types has a variation that can be se-
lected using the VARIATION function in the EFFECT page. To vary the
effect produced by the selected effect type, press the LCD button under
VARIATION.
VARIATION function
• Settings: OFF, ON
• Basic setting: Depends on voice.
45