Master module, Cb 0 9 8 a – Yamaha MT4X User Manual

Page 9

Advertising
background image

7

Controls and Connections

User’s Guide

ODD/L: Rotated fully counter-clockwise sends the signal to the odd (1 or 3) numbered track of the
selected track group (ASSIGN keys

4

) and to the left channel of the STEREO bus.

EVEN/R: Rotated fully clockwise sends the signal to the even (2 or 4) numbered track of the
selected track group (ASSIGN keys) and to the right channel of the STEREO bus.

6

Input select (TAPE - MIC/LINE) key

This key selects the input source for the channel. Pressed in (

), it selects the tape track

corresponding to the channel module (for example, the channel 1 key selects track 1). In the out
position (

), the source is the MIC/LINE INPUT connector (

h

).

7

Channel fader

This linear control is used to set the channel level. For optimal performance and signal balance, the
fader should be positioned between 7 and 8.

Master Module

8

AUX RETURN - ASSIGN keys

These keys assign the signal from the AUX RETURN connectors
(

i

) to the selected group bus.

9

Auxiliary return LEVEL controls

These rotary controls adjust the level of the auxiliary return
signal.

0

MONITOR SELECT keys

These keys are used to select the group buses, the stereo bus,
and the cue bus signals. The signals are routed to the
MONITOR OUT (

f

) connectors on the rear panel and the

stereo PHONES (

d

) connector on the front of the MT4X.

GROUP

: These keys select groups 1 and 3 and groups 2 and 4

respectively. If you select both keys, groups 1 and 3 will be sent
to the left channel and groups 2 and 4 will be sent to the right
channel.

STEREO

: This key selects the stereo bus signal.

CUE

: This key selects the cue bus signals. These are the playback

signals direct from the cassette tracks. When you are recording,
the record signal is monitored.

A

CUE LEVEL controls

These rotary controls adjust the level of the signal from each
track before it is sent to the cue bus.

B

MONITOR/PHONES level control

This rotary control adjusts the volume level of the stereo
PHONES (

d

) connector and the MONITOR OUT (

f

)

connectors.

MASTER

1

2

3

4

GROUP

1

3

2

4

ASSIGN

1

3

2

4

ASSIGN

1

2

AUX RETURN

LEVEL

10

9
8
7
6
5
4
3
2
1
0

10
9
8
7
6
5
4
3
2
1
0

1

3

2

4

0

10

0

10

0

10

0

10

0

10

0

10

MIN

MAX

CUE LEVEL

MONITOR

SELECT

STEREO

CUE

MONITOR/PHONES

C

B

0

9

8

A

Advertising