ZyXEL Communications P2000W - Manual (Page 33)

P-2000W_V2 User’s Guide
Chapter 3 Wireless LAN Setup Menus 33
C
H A P T E R
3
Wireless LAN Setup Menus
First you need to associate your Prestige with a Wireless LAN Access Point (AP). This
provides your Prestige with the basic services for communication.
When you turn the Prestige on, it searches for available wireless LAN Access Points (APs). It
selects the AP with the best signal and restarts and attempts to connect to it.
Use the following sections if you want to enter a WEP key or manually specify other wireless
settings. The Prestige restarts when you return to the main screen after changing the wireless
settings.
3.1 Site Survey
Do the following to browse the APs available in your area and select one.
1 Select Wireless in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
8. Restart
1. Information
Select Back
2 Select Site Survey.
3 The Prestige checks for and displays a list of available APs. 2. SSID
3. Network Mode
Select Back
4 An AP’s SSID (name) is followed by a number describing its
relative signal strength. The higher the number, the better the
signal. A “W” next to an AP’s name means that the AP uses
WEP encryption Select an AP to use.
AP2 90
AP3 85
Select Back
7. Wireless
1. Site Survey
AP1 99 W
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030