ZyXEL Communications P2000W - Manual (Page 38)

P-2000W_V2 User’s Guide
38 Chapter 3 Wireless LAN Setup Menus
Note: Only set the authentication type to shared key if the wireless clients are
required to send the WEP key to the AP for authentication (not just for
encryption). Many networks use an open system where you would only use
WEP for encryption, not for authentication.
3.8 Profiles
Use a profile to save your wireless settings for future use.
1 Select Wireless in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
8. Restart
1. Information
Select Back
2 Use the up or down arrow and the Left key to select Auth
Type.
1. Site Survey
2. SSID
Select Back
3 Select Shared Key if the wireless clients need to send the WEP
key to the AP for authentication.
Select Open System if the wireless clients do not need to send
the WEP key to the AP for authentication.
4 The Prestige restarts when you return to the main screen.
[1] Open System
Select Back
7. Wireless
8. Auth Type
[2] Shared Key
1 Select Wireless in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
8. Restart
1. Information
Select Back
2 Use the up or down arrow and the Left key to select Profiles.
8. Auth Type
1. Site Survey
Select Back
7. Wireless
7. Profiles
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030