ZyXEL Communications P2000W - Manual (Page 34)

P-2000W_V2 User’s Guide
34 Chapter 3 Wireless LAN Setup Menus
3.2 SSID
(Service Set ID) The SSID identifies the Service Set with which a wireless station is
associated. Wireless stations associating to the access point (AP) must have the same SSID.
You can think of the SSID as being similar to a workgroup name in a Microsoft network. Do
the following to set the SSID that the Prestige is to use.
3.3 Network Mode
The Ad Hoc network is the simplest WLAN configuration, consisting of two or more wireless
devices within range of each other that form an independent network without the need of an
access point (AP).
An Infra. (infrastructure) network has an AP that allows wireless clients to connect to the
wired network.
Do the following to select the network mode that the Prestige is to use.
1 Select Wireless in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
8. Restart
1. Information
Select Back
2 Select SSID.
3. Network Mode
4. Channel
Select Back
3 The Prestige displays the SSID that it is currently using. You
can clear the SSID and enter a different one if you need to.
SSID
ZyXEL
Ok Aa1@ Clear
7. Wireless
2. SSID
1 Select Wireless in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
8. Restart
1. Information
Select Back
7. Wireless
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030