ZyXEL Communications P2000W - Manual (Page 45)

P-2000W_V2 User’s Guide
Chapter 5 SIP Settings 45
C
H A P T E R
5
SIP Settings
The Prestige uses Session Initiated Protocol (SIP), an internationally recognized standard for
implementing VoIP.
You must register your Prestige with your VoIP service provider’s SIP server.
Note: You should have a voice account already set up.
5.1 Registrar Server
Configure the Registrar settings to have the Prestige register with your provider’s SIP
registrar server.
Note: If you have no registrar server information, use the SIP server IP address and
port number.
1 Select SIP Settings in the first menu screen.
6. Settings
7. Wireless
Select Back
2 Select Registrar.
2. OutboundProxy
3. Proxy Server
Select Back
3 Select Registrar IP.
2. Port
3. Expiry Time
Select Back
4 Use the left arrow button to clear the default text. Use the up
and down arrows to select the type of characters. Enter the
registrar server’s IP address or domain name. Use the Left key
to select Ok when you are done.
Registrar IP
sip.proxy.net
Ok Aa1@ Clear
5. SIP Settings
1. Registrar
1. Registrar IP
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030