Yamaha HTR-5940 - Manual (Page 32)

28
BASIC SETUP
5
Press d to select “SUBWOOFER” and then
j / i to select the desired setting.
Choices: YES, NONE
• Select “YES” if you have a subwoofer in your
system.
• Select “NONE” if you do not have a subwoofer in
your system.
6
Press d to select “SPEAKERS” and then j / i
to select the number of speakers connected
to this unit.
7
Press d once and then j / i to select the
desired setting.
>SET CANCEL
Choices: SET, CANCEL
• Select “SET” to apply the settings you made.
• Select “CANCEL” to cancel the setup procedure
without making any changes.
y
You can also press SET MENU to cancel the setup
procedure.
8
Press ENTER to confirm your selection.
If you selected “SET” in step 7, each speaker outputs
a test tone twice in turn. “CHECK:TestTone” appears
in the front panel display for a few seconds and then
“CHECK OK?” appears in the front panel display.
y
Check the speaker connections (see page 13) and adjust the
“SPEAKERS” settings back in step 6, if necessary.
Choice Display Speakers
2spk Front L/R
3spk Front L/R, Center
4spk Front L/R, Surround L/R
5spk Front L/R, Center, Surround L/R
6spk
Front L/R, Center, Surround L/R,
Surround back
SUBWOOFER
..YES
A-E/CAT. A-E/CAT.
ENTER
PRESET/CH
A-E/CAT. A-E/CAT.
ENTER
PRESET/CH
SPEAKERS
..6spk
A-E/CAT. A-E/CAT.
ENTER
PRESET/CH
A-E/CAT. A-E/CAT.
ENTER
PRESET/CH
L L C R
SL SB SR
L L C R
SL SB SR
L L C R
SL SB SR
L L C R
SL SB SB SR
L L C R
SL SB SR
A-E/CAT. A-E/CAT.
ENTER
PRESET/CH
A-E/CAT. A-E/CAT.
ENTER
PRESET/CH
A-E/CAT. A-E/CAT.
ENTER
PRESET/CH
CHECK:TestTone