Yamaha HTR-5940 - Manual (Page 37)

33
USING OTHER FEATURES
BA
S
IC
OPE
R
A
T
IO
N
y
“NIGHT:CINEMA” and “NIGHT:MUSIC” adjustments are
stored independently.
• You cannot use the night listening modes when the
“DIRECT STEREO” program (see page 38) is selected or
when the component connected to the MULTI CH INPUT
jacks is selected as the input source (see page 37) even
though the NIGHT indicator lights up when “DIRECT
STEREO” is selected.
• The night listening modes may vary in effectiveness
depending on the input source and surround sound settings
you use.
This unit comes with a variety of input jacks. Do the
following to select the type of input signals you want to
use.
y
You can adjust the default input mode of this unit by using the
“INPUT MODE” parameter in “INPUT MENU” (see page 82).
• To play DTS-encoded DVDs and CDs, (when using a digital
audio connection, be sure to set “INPUT MODE” to “DTS”.
• If the digital output data of the player has been processed in any
way, you may not be able to perform DTS decoding depending
on the player even if you make a digital connection between this
unit and the player.
1
Rotate the INPUT selector on the front panel
to select the desired input source.
2
Press INPUT MODE on the front panel
repeatedly to select the desired input mode.
AUTO Automatically selects input signals in
the following order:
1) Digital signals
2) Analog signals
DTS Selects only digital signals encoded in
DTS. If no DTS signals are input, no
sound is output.
ANALOG Selects only analog signals. If no
analog signals are input, no sound is
output.
• When “INPUT MODE” is set to “AUTO”, this unit
automatically switches to the appropriate decoder if a
Dolby Digital or DTS signal is detected.
• We recommend setting “INPUT MODE” to “AUTO” in
most cases.
Notes
Selecting the input mode
Notes
INPUT
Notes
INPUT MODE
DVR pDVD CD XM V-AUX DTV/CBL MD/CD-R TUNER
VOLUME
A
SP
dB
L R
DVD AUTO
Currently selected input
source
Currently selected input
mode
Available input sources