Yamaha HTR-5940 - Manual (Page 88)

ADVANCED SETUP
84
This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional
operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening environment.
• The settings you make are reflected next time you turn on this unit by pressing STANDBY/ON on the front panel (or POWER on the
remote control) (see page 26).
• Only STANDBY/ON, STRAIGHT (EFFECT) and the PROGRAM l / h buttons are effective while you are using the advanced
setup menu.
• All the other operations cannot be made while you are using the advanced setup menu.
• The advanced setup menu is only available in the front panel display.
1
Press STANDBY/ON on the front panel to set
this unit to the standby mode.
2
Press and hold STRAIGHT (EFFECT) on the
front panel and then press STANDBY/ON to
turn on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
3
Press the PROGRAM l / h buttons on the
front panel repeatedly to select the
parameter you want to adjust.
The name of the selected parameter appears in the
front panel display.
See page 85 for a complete list of available
parameters.
4
Press STRAIGHT (EFFECT) on the front
panel repeatedly to change the selected
parameter setting.
5
Press STANDBY/ON on the front panel to
save the new setting and set this unit to the
standby mode.
y
The settings you made are reflected next time you turn on
this unit.
ADVANCED SETUP
Notes
VOLUME
AUTO/MAN'L MAN'L/AUTO FM LEVEL NEXT EDIT
EFFECT
MEMORY FM/AM PRESET/TUNING A/B/C/D/E
l PROGRAM h
BASS/TREBLE
l PRESET/TUNING/CH h TUNING MODE
INPUT MODE
TONE CONTROL
STRAIGHT SPEAKERS PHONES
SILENT CINEMA
STANDBY /ON
B A MULTI CH INPUT
INPUT
SEARCH MODE DISPLAY CATEGORY
VIDEO PORTABLE L AUDIO R
VIDEO AUX
3 2,4 1,2,5
(U.S.A. model)
STANDBY
/ON
STANDBY
/ON
EFFECT
STRAIGHT
While holding
down
l PROGRAM h
SP IMP.-8 MIN
Currently selected
parameter setting Currently selected
parameter
EFFECT
STRAIGHT
STANDBY
/ON