Yamaha CLP-280 - Manual (Page 88)

88
CLP-280/270 Owner’s Manual
Detailed Settings
Other settings [FUNCTION]
This parameter is effective on the voices, such as
“Grand Piano 1.”
See the procedure on page 69.
Setting range:
Off, 1 - 10
This parameter is effective only on the voice group
“GRANDPIANO1.”
See the procedure on page 69.
Setting range:
Off, 1 - 10
You can adjust the volume of the key-off sound (the
subtle sound that occurs when you release a key)
This is effective on the voice groups “Grand
Piano1,” “Harpsichord,” and “E.Clavichord” and
on the voice “E.Piano2.”
See the procedure on page 69.
Setting range:
Off, 1 - 10
This specifies the amount of change that can be
produced by the pitch bend function which
smoothly varies the pitch.
• This setting applies only to the manually-played
sound.
• This setting can be made in semitone steps.
• You can set the pedal function (page 85) to spec-
ify whether the pitch will be raised or lowered.
See the procedure on page 69.
Setting range:
0
- +12 (Pressing the pedal will raise/lower the pitch by
12 semitones [1 octave])
Normal setting:
–2
This setting lets you switch the speaker on/off.
See the procedure on page 69.
Normal (HeadphoneSW)
The speaker will sound only if headphones
are not connected.
On The speaker will always sound.
Off The speaker will not sound.
Setting the depth of string resonance
[StringResonanceDepth]
Setting the depth of sustain sampling
for the damper pedal
[SustainSamplingDepth]
Specifying the volume of the key-off
sound [KeyOffSamplingDepth]
B
D
NO YES
A
C
StringResonanceDepth
5
B
D
NO YES
A
C
SustainSamplingDepth
5
B
D
NO YES
A
C
KeyOffSamplingDepth
5
Setting the range of pitch bend
[PitchBendRange]
Switching the speaker on/off
[Speaker]
B
D
NO YES
A
C
PitchBendRange
2
B
D
NO YES
A
C
Speaker
Normal(HeadphoneSW)